Livecareer-Resume
Jessica Claire
Montgomery Street, San Francisco, CA 94105
Home: (555) 432-1000 - Cell: - resumesample@example.com - -
Summary
QA/QC Electrical/I&C/Civil (L) & Mechanical Level II Inspector Thirty years of electrical controls and instrumentation experience. Worked as an I & C technician, Electrician, Supervisor and preformed planning, scheduling, startup, walk downs, and preventive maintenance in nuclear, fossil fuel, chemical, and manufacturing industries. 8 years Quality Control Level II Inspector for Electrical/ I & C, and Civil Limited Certification II
Skills
  • Self-starter
  • Responsible and reliable
  • Strong attention to detail


  • Customer service-oriented
  • Troubleshooting
  • Excellent problem solver
Experience
10/2017 to 11/2017
QA/QC Inspector Mastec , ,
  • Supported daily activities inspections for outage and operating plant conditions.
  • Inspection of modifications to existing plant equipment Which included: Parts verification, Receiving, inspecting, and issuing of safety related parts, Completing all documentation required for receipt inspections, Installation of conduit, Anchor bolt installations included Hilti and Maxi bolts, Anchor bolting torqued as required.
  • Verified torque requirements for anchors for hangers, Equipment supports, Junction boxes, Instrument installations, Cable tray installation, Hanger installation, Inspected tubing installation for makeup and cleanliness per plant guidelines, Cable verification, Pulling cable, Verified train separation requirement, Labeling of conductors and cables, Meggaring cables, Installation and termination of all safety related wiring, Striping conductors, Crimping of lugs, terminations, Correct lugs, Torque requirements for conductors as per plant specifications, Also included was patching with dry patch grout, Abandoned hole inspection, Documented reports, and utilized Power Point software, Inspection of modifications to control room cabinets and safety-shutdown facility, Verified torque requirements for cabinets, MOV valves terminations, Breaker terminations, 4160KV motor control centers cleanliness, terminations, torqueing requirements.
  • Reviewed procedures, work orders, electrical schematics, installation drawings, inspections of safety related parts, as per bill of material Followed correct procedure use and adherence and all safety practices involved.
  • Ensured craft was utilizing proper procedure and up to date, drawings, schematics.
  • Installation of Pressurized Service Water Project, Fire Protection Equipment and complete replacement of Control Panels in the main control rooms Modifications of safety related electrical equipment along with control room, auxiliary & reactor buildings, and Diesel generator.
  • Inspections for modifications to Keowee Hydroelectric Plant Facility Electrical, I & C, Civil, and Mechanical 2009 to present 02/17 to DZ Atlantic at Brunswick and McQuire Nuclear Power Station.
07/2017 to 08/2017
Bickford Senior Living , ,
06/2017 to 07/2017
Bickford Senior Living , , Columbia
04/2017 to 05/2017
Bickford Senior Living , ,
02/2017 to 04/2017
Bickford Senior Living , ,
09/2017 to 11/2017
Bickford Senior Living , ,
02/2017 to 09/2017
Bickford Senior Living , ,
09/2017 to 11/2017
Bickford Senior Living , ,
05/2017 to 09/2017
Bickford Senior Living , ,
11/2017 to 04/2017
Bickford Senior Living , ,
06/2017 to 11/2017
Bickford Senior Living , ,
09/2017 to 05/2017
, ,
  • DZ Atlantic at Oconee Nuclear Power Station The following places and job titles were I & C Technician, Electrical, and Mechanical related experiences;.
04/2017 to 05/2017
AOV Technician Bickford Senior Living , ,
  • Testing, troubleshooting, rebuilding of air operated Valves and Pneumatic controllers.
02/2017 to 03/2017
Junior Diagnostic Technician Boar's Head Provisions Co., Inc. , ,
  • Setup diagnostic equipment for testing of air operated valves, fine tune controllers, adjust stroke travel on stem, verified proper operation as per plant procedures and requirements.
09/2017 to 11/2017
I & C Technician Silgan Containers Corporation Lancaster, OH,
  • Blueprint reading, layout conduit runs, install conduit, pull wire, terminate wire at field devices, and termination cabinets, and assist engineers in troubleshooting, 3 phase motors and testing of control systems.
05/2017 to 06/2017
AOV Technician Bickford Senior Living , ,
  • Testing, troubleshooting and rebuilding air operated valves and pneumatic controllers.
01/2017 to 04/2017
I & C Technician Bickford Senior Living , ,
  • Testing, troubleshooting and rebuilding air operated valves and pneumatic controllers.
09/2017 to 10/2017
AOV Technician Boar's Head Provisions Co., Inc. , ,
  • Testing, troubleshooting and rebuilding air operated valves and pneumatic controllers.
06/2017 to 09/2017
Electrician Boar's Head Provisions Co., Inc. Canton, MI,
  • Service generator and air compressors, troubleshoot control circuits and repair as required, install control panels, motor starters, and electrical disconnects, repair and install outdoor lighting, troubleshoot electrical pump circuits.
04/2017 to 05/2017
Industrial Electrician Bickford Senior Living Redding, CA,
  • Blueprint reading, layout conduit runs, install conduit, pull wire, terminate wire at field devices, and termination cabinets, and assist engineers in troubleshooting, three phase motors and testing control systems.
03/2017 to 04/2017
Boar's Head Provisions Co., Inc. , ,
  • at Port Saint Lucie Nuclear Station I & E Technician - Remove, rebuild, and reinstall general valves.
02/2017 to 03/2017
I & C Technician Eli Lilly And Company , ,
  • Calibrate, flow, pressure, temperature, radiation monitoring devices, and core monitoring detection devices.
  • Testing and troubleshooting air operated valves and pneumatic controllers.
10/2017 to 12/2017
I & E Technician Boar's Head Provisions Co., Inc. , ,
  • Calibration of transmitters, gauges, and pressure switches.
  • Testing of nuclear instrumentation, Foxboro, temperature devices, and verifying control loops.
08/2017 to 09/2017
I & C Technician Boar's Head Provisions Co., Inc. , ,
  • Calibration of transmitters, gauges, and pressure switches.
  • Testing of nuclear instrumentation, Foxboro, temperature devices, and verifying control loops.
04/2017 to 05/2017
The Kraft Heinz Company , ,
  • I & E Technician - Calibrate, flow, pressure, temperature, radiation monitoring devices, and core monitoring detection devices.
  • Testing and troubleshooting air operated valves and pneumatic controllers.
03/2017 to 04/2017
I & C Technician Boar's Head Provisions Co., Inc. , ,
  • Calibrated transmitters, removed and calibrate gauges, and setup positioners, and tested interlock circuitry.
02/2017 to 03/2017
I & C Technician DZ Atlantic At Palisades Nuclear Power Station City, STATE,
  • Duties included rebuild valve and actuator assemblies, and calibration of positioners.
09/2017 to 02/2017
I & C Technician Millennium Power Services City, STATE,
  • Duties included install piping instruments air header.
  • Also calibrated and tested equipment.
08/2017 to 09/2017
Electrician The Industrial Company City, STATE,
  • Installed and fabricated conduit, layout runs, and pull wire terminals.
04/2017 to 05/2017
Electrician Aero Techs , ,
  • Lay out and installed conduit, pulled wire, terminated field devices and control cabinets.
03/2017 to 04/2017
AOV/ I & C Technician , ,
  • DZ Atlantic at DC Cook Nuclear Power Station Testing, troubleshooting, and rebuilding of air operated valves and pneumatic controllers.
02/2017 to 03/2017
DZ Atlantic At Surry Nuclear Power Station City, STATE,
  • Electrician - Ran conduit, pulled wire and terminated.
10/2017 to 01/2017
Electrician NA City, STATE,
  • Lay out and installed conduit, pulled wire, terminated field devices and control cabinets.
  • Tested and startup of precipitator units.
06/2017 to 10/2017
Instrument Technician Casey Industrial Inc City, STATE,
  • Calibrated, function tested troubleshot pressure, flow, level, and vibration, temperature devices in field and calibration shop, prepared calibration records.
01/1 to 04/2017
Electrician Casey Industrial Inc City, STATE,
  • Instructed other electricians on duties, safety, and responsibilities, blueprint reading, laid out conduit runs, installed conduit, pulled wire, terminated wire at field devices and terminated cabinets.
  • Assisted engineers in troubleshooting, 3 phase motors and control systems.
01/1 to 01/1
Electrician The Industrial Company City, STATE,
  • Assisted in troubleshooting, electrical/mechanical systems associated with production support, operated and directed overhead crane activities, utilized battery powered hand trucks and operated fork truck.
  • Troubleshot/rebuilt and tested traction motor repair.
01/1 to 01/1
Electronic Technician Casey Industrial, Inc City, STATE,
  • Installed, terminated, and inspected wiring harnesses and associated hardware as required.
  • Electrical schematic reading, soldering shielded cable, crimping lugs/pins, and installed connectors.
01/1 to 01/1
Mechanical/Engineering Technician Consolidated Rail/Norfolk Southern Corp City, STATE,
  • Provided mechanical support for projects, employee training, installations and testing of manufacturing and testing equipment, troubleshooting and maintaining equipment to manufacturing mechanical specifications.
  • Designed electrical and mechanical equipment to interface with existing equipment to increase the performance and production Design were of hand sketch and AutoCAD rev 12 and 13.
  • PLC equipment included Mitsubishi.
  • Page | 3.
01/1 to 01/1
Electrician Aero Tech Contract Engineering Svc City, STATE,
  • Removed and installed CNC machines, installed conduit, pulled wire and terminated control circuits, lighting circuits, and distribution panels.
Education and Training
Expected in 2016
Mechanical Inspection Training Certification, completed with DZ Atlantic:
- ,
GPA:
Obtained partial Civil Inspector Level II for Maxi and Hilti Bolt Hole Inspections, which included vendor certification and on sight training for depth, size, cleanliness, and rebar inspections, also under Civil qualifications was grout, penetration seals, and concrete. I Also received OJT on mechanical valve installation and grout installation and all documentation required for pouring of Master Flow 713 plus.
Expected in
Further experience in the installation of fire penetration seals documented in NIC and Exelon training Certification Course and OJT documentation for modifications June, 2009 Procedure Writing Certification Course Penn State University, Introduction to AutoCAD Niagara County Community College, Engineering Drawing 1 and 2 Altoona Area Vo-Tech, Certification in Instrumentation Technology/Electric Mechanical Technology/Robotics United States Air Force, Aircraft Maintenance Specialist:
Williamsburg High School - ,
GPA:
Expected in
Graduate:
- ,
GPA:
Skills
Air Force, AutoCAD, Blueprint reading, C, cables, Cable, Calibration, hardware, CNC, DC, documentation, electrical schematics, Electrical schematic, Electrician, employee training, Fire Protection, Drawing 1, hand trucks, Hydroelectric, inspecting, Inspection, Inspector, layout, lighting, Mechanical, Power Point, NIC, Page, PLC, Procedure Writing, reading, Receiving, requirement, Robotics, safety, schematics, soldering, switches, Technician, troubleshoot, troubleshooting, wiring
Activities and Honors

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Disclaimer

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:

75Average

resume Strength

  • Personalization
  • Target Job

Resume Overview

School Attended

  • Williamsburg High School

Job Titles Held:

  • QA/QC Inspector
  • AOV Technician
  • Junior Diagnostic Technician
  • I & C Technician
  • AOV Technician
  • I & C Technician
  • AOV Technician
  • Electrician
  • Industrial Electrician
  • I & C Technician
  • I & E Technician
  • I & C Technician
  • I & C Technician
  • I & C Technician
  • I & C Technician
  • Electrician
  • Electrician
  • AOV/ I & C Technician
  • Electrician
  • Instrument Technician
  • Electrician
  • Electrician
  • Electronic Technician
  • Mechanical/Engineering Technician
  • Electrician

Degrees

  • Mechanical Inspection Training Certification, completed with DZ Atlantic
  • Further experience in the installation of fire penetration seals documented in NIC and Exelon training Certification Course and OJT documentation for modifications June, 2009 Procedure Writing Certification Course Penn State University, Introduction to AutoCAD Niagara County Community College, Engineering Drawing 1 and 2 Altoona Area Vo-Tech, Certification in Instrumentation Technology/Electric Mechanical Technology/Robotics United States Air Force, Aircraft Maintenance Specialist
  • Graduate

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in: