LiveCareer-Resume

process maintenance supervisor resume example with 20+ years of experience

Jessica
Claire
resumesample@example.com
(555) 432-1000,
, , 100 Montgomery St. 10th Floor
:
Summary

Highly Qualified and Licensed Electrician/Instrumentation Technician. I have wired everything from Home's,School's,Hospitals too Factory's. My Career has taken me a lot of places all around this big country. I have strong leadership skills and work well independently and have 20+ year's in this field and I'm looking forward to another 20+ year's in it. Very Reliable and pay great attention to detail for Safety and Cost purposes. I look forward to continuing my Career and Education with a stable Company.

Skills

Plan,Size,Install and Repair electrical and Instrumentation Equipment. Provide the right Equipment through Insight and Calculation and working with Engineer's to get the Equipment up and running effectively and efficiently.

Installing Conduit,Sizing and pulling Wire,Installing Panelboard"s,Transformer's,Lighting Equipment, Generation Equipment.

Calibrating Transmitters,setting up and Programing Loop Control System's,and Installing and Programing V.F.D's.

Running Airlines and setting up Pneumatic Control system's and Sizing Valves as well as what Material and specification Valve's needs to be made.

Installing and Maintaining P.L.C's.

Reading Blueprint's

Installing Equipment to Manufacture's Spec

Welding and Fabrication

Service Generation Systems 120/240, 277/480 volt

Programming with Hart Communication

Education and Training
Cros-Lex High School Croswell, MI, Expected in 06/1999 High School Diploma : - GPA :
SC4 Port Huron, MI, Expected in : Electrical, Electronics Engineering Technologies - GPA :
Technical Training Centers of Consumer's Energy Midland, MI, Expected in : Instrumentation And Controls - GPA :
Rockwell Automation Saginaw, MI Kendall Electric, Expected in : Program Logic Controller's And V.F.D's - GPA :
Certifications

State of Michigan Journeyman License.

T.T.C of Consumers Energy Course's

B07,Pressure Measurements & Pneumatics

B08,Flow and Level Measurement

B09,Automatic Controls

B10A,Actuators,Recorders & Basic Chemistry

Rockwell Automation

CCP RSLogix 5000 Maintenance and Troubleshooting

CCA PowerFlex 700 Maintenance and Troubleshooting

High School Diploma

SC4 College Electrical Theory,Motor's and Control's.

Smoke Stack Training through E.P.A.

Experience
Sabic Innovative Plastics Us Llc - Process/Maintenance Supervisor
Bay St Louis, MS, 07/2020 - Current
  • Delegated daily tasks to employees to manage resources and meet deadlines.
  • Maintained clear and safe workspace areas to meet OSHA standards.
  • Analyzed and identified equipment failure root causes and initiated correction actions.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
  • Repaired equipment and machinery, performing maintenance according to updated industry standards.
  • Implemented improved training procedures to better develop new personnel.
  • Collected data to compile detailed reports for upper management and closely monitored equipment, tools and system upgrades.
  • Overhauled, installed and repaired equipment, including centrifugal compressors, pumps, valves, separators and generators.
  • Contacted vendors to procure equipment and tools to meet organizational demands.
  • Reviewed blueprints and manuals to repair and restore optimal functionality.
  • Used electrical drawings to troubleshoot and repair electro-mechanical and other systems.
  • Ran machinery diagnostics rounds to meet performance thresholds.
  • Specialized in support systems, inspections and detailed repairs to achieve operational efficiency.
  • Read blueprints and specifications to determine best methods to approach maintenance projects.
  • Worked with outside vendors to prepare for large system installations and complex repairs.
  • Designed, fabricated and installed upgrades to improve existing equipment.
Corning - E/I Technician
Vineland, NJ, 10/2009 - 07/2020
  • Installed process machinery and special equipment along with new and replacement parts.
  • Executed routine maintenance for advanced processes.

Installed, Calibrated and Maintained Electrical and Instrumentation Equipment.

Electrical Equipment ranged from 0v to 13,200 volts, AC/DC system's.

Installed,Calibrated and Maintained Process control Loop's 0-10v and 4 to 20ma.

Installed, Programmed and Serviced P.L.C's etc; Allen Bradley,WestingHouse,Square D,ABB,Micrologic.

Calibrated Transmitter for Level,Pressure,Flow,Temperature,Conductivity,and P.H,as well as other specialty measurements used in Sugar Manufacturing.

Repaired and Installed Pneumatic and Electric operated Valves ranging from 1/8" to 72" Valve's. Etc; Flowserve,Jamesbury, Xomo, Bray, Controlmatics and many more.

Installed and Maintained I/P and P/I system's.

Maintained Coal and Natural gas Boiler system's. Natural gas pressure's up to 200psi and Steam Pressure up to 250psi.

Welded and Fabricated on Equipment to modify Equipment to perform better.

Networked Controls system so Plant could be operated by a Central Control Room via Central Server.

Installed and Serviced Compressed Air Systems up to 200psi as well as Vacuum System.

Executed Work Orders and Logged it into A.M.S System.

Completed E/I Training program and Trained incoming Apprentice's.

Names of some Manufacture's of Equipment'Abb,Foxboro,Yokagawa,Vega,Allen Bradley,Square D,Siemen's,Westinghouse.

  • Checked for leaks and defects on vacuum and mechanical assemblies.
  • Reduced waste and streamlined schedules to optimize manufacturing processes.
  • Organized, analyzed and prepared technical data reports.
  • Supplied production data to field operators, technicians, engineers and supervisors.
  • Worked from layout and work order, created programs and set up machines to produce required parts.
  • Installed [Type] machinery and [Type] equipment along with new and replacement parts.
  • Set up and operated production equipment in accordance with good manufacturing practices and SOPs.
  • Recommended corrective and preventative actions to boost product reliability.
  • Demonstrated excellent mechanical knowledge of machine design, use, repair and maintenance.
  • Assembled parts using bolts, screws, speed clips, rivets and other fasteners.
Rockwell Automation, Inc. - Electrician
Sioux Falls, SD, 01/2002 - 10/2009

Installed and Serviced Electrical Equipment in Residential,Commercial and Industrial Environments. Became a Apprentice Electrician and moved on to become a Journeyman Electrician. Installed and Serviced Electrical Equipment from 1-12.000 volts.Continued on to become a Foreman and run Jobsite's. All Equipment was Installed to NEC specification.

  • Troubleshot electrical control circuits using [Technique].
  • Troubleshot EMCS and variable frequency drive systems.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Troubleshot [Number] to [Number] volt equipment to identify and address concerns.
  • Utilized wide breadth of testing equipment to assess electrical systems, circuit continuity and accessory fixtures.
  • Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
  • Examined and created solutions for high voltage electrical system problems.
  • Worked to code on all projects, utilizing drawings and manuals.
  • Installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
  • Connected wires to circuit breakers and transformers.
  • Performed electrical utility services for industrial based and new building projects.
  • Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
Mifsud Electric - Apprentice Electrician
City, STATE, 06/1999 - 01/2002
  • Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
  • Resolved issues with existing systems and replaced malfunctioning parts.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Kept work areas clean, neat and free of hazards.
  • Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
  • Managed repairs and maintenance work on client systems and confirmed system adherence to coding requirements.
Accomplishments

Worked through Apprenticeship and became Journeyman Technician/Electrician. Trained Multiple personal that also became Journeyman E/I's. Helped the Company produce S.O.P's.

Picked by top Corporate Management to attend the Institute of Sugar Technology School in Denver Colorado.

Completed E/I training program through Michigan Sugar Company and Federal BACT program. Furthered on to Management over Process Operation and Maintenance.

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Cros-Lex High School
  • SC4
  • Technical Training Centers of Consumer's Energy
  • Rockwell Automation

Job Titles Held:

  • Process/Maintenance Supervisor
  • E/I Technician
  • Electrician
  • Apprentice Electrician

Degrees

  • High School Diploma
  • Some College (No Degree)
  • Some College (No Degree)
  • Some College (No Degree)

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: