NACE Coating Inspector Resume Example Lower Gate Left Leaf

NACE COATING INSPECTOR

Summary

Seeking to fulfill a full-time, part-time, or an independent contractor position within a highly reputable industrial coating establishment. One that implements thorough industrial coating inspections and or executes good painting practices, therefore adhering to project specification requirements, industry standards, procedures, methods and application techniques takes president. The industrial coating establishment should specialize in one or more of the following fields. Industrial Coating inspection, Industrial and marine coatings and lining applications, thermal spray applications and or employ a large steel fabrication coating facility.

Accomplishments

CERTIFICATIONS:
Nace Coating Inspector Level II Certified Certification No. 45861 (CIP) Level II (June 2013).
SSPC-C3 Supervisor/Competent Personal Training for Deleading of Industrial Structures. (April 2008)
Polyurea Development Association's Applicator Course (PDA) (July 2008)
International Union of Painters & Allied Trades (IUPAT) District Council 77 Journeyman Painter. (July 2007)
OSHA 10 (10-hr) Safety Course. (Sept 2007)
HAZWOPER (29CFR1910.120) 8-hr Supervisor Program (June 2008) No. 43674.
HAZWOPER (29CFR1910.120) 8-hr Incident Commander Program (June 2008) No. 43674.
HAZWOPER (29CFR1910.120) 40-hr Worker Program (June 2008) No. 43674.
HAZWOPER Permit Required Confined Space (29CFR1910.146) 8-hr Entrant & Attendant Program (June 2008) NO. 45953.
Note: : Unfortunately, the (4) HAZWOPER certificates listed above have exceeded their expiration dates, and require either, a refresher, or re-registering for additional courses. However, the certificates will hopefully provide the proper personnel with knowledge of the various types of potential hazardous project coating applications work environments.
Carboline: (AISC) 420-10 Standard for Shop Application of Complex Protective Coating Systems (March 2015).
BAE System: AIDT/ISO: 9001:2000 Basic Technicians Skills 18-hr (May 2007).

Experience

01/2015 to 01/2016

Lower Gate Left Leaf

01/2014 to 01/2015

Lower Gate Right Leaf

Perform In-process quality control (Industrial Coating Inspection) of newly fabricated structural steel weldments and or parts.
Fulfilling all customer and employer contractual duties throughout all project phases.
Aid in achieving continuous communication with point of contact.
Continuous Interpreting project specification requirements and coating mfg.
product data/technical sheets or conflicting information found throughout project specification processes or jobsite-walk-through.
Negotiating a well-coordinated goal toward key principles, and project development.
Share previously completed project information and coating experiences, considered beneficiary to fellow employees throughout the surface prep and coating applications processes.
Address applicator techniques and application inconsistencies, while offering my personal input, and hands on training.
Document and record all findings through daily hand written logs and or electronic processes.
Obtain, analyze and absorb all project specification requirements, submittals, contract drawings, revised drawings, any other project related documents and entities regarding the project coating specification requirements.
Obtain and review all federal, state, and local codes and regulations, current international standards, methods, practices, procedures that pertain to the project and its specifications.
Review, analyze, and submit all required certifications and or valid certifications for coating inspectors, current inspection instrument calibration certificates, coating manufacture (C.O.A.'s) certificate of analysis, dry abrasive blast media selections etc.
Properly size all required equipment.
Perform pre-equipment run evaluations.
Assuring all equipment had been found to be in accordance with project surface prep and coating application guidelines and meet all.
Document, submit and request direction for all areas considered inaccessible due to structural or architectural engineering designs and shall receive a specified coating system.
Field Applications.
Customers: USACE.
Industries: Hydro-power.
Structure Types: Newly Fabricated Structural Steel Lock and Dams (hydraulic structures).

01/2014 to 01/2015

Steward Machine Co., Inc － Birmingham, AL

Independent Subcontractor, NACE Coating Inspector Level II Certified, Industrial Painter, Thermal-Arc-Spray-Applicator/ (Metallizing) Duties:.
Perform In-process quality control (Industrial Coating Inspection) of newly fabricated structural steel weldments and or parts.
Offering thorough Representation while performing and fulfilling employer contractual duties during project involvement.
Request employer/customer consent to obtain, analyze and absorb project specification requirements, contract drawings, revised drawings, related documents and entities regarding the project coating specification requirements inspection hold points, surface pre-cleaning, surface preparation final cleaning, coating applications of non-immersible and immersible coatings.
Review, analyze, and absorb international standards, methods, codes, practices and procedures that pertain to project specification requirements.
Document and record all finding through daily hand written or electronic processes.
Review, analyze, and submit all required documentation, and or certifications for coating inspectors, coating inspection instruments, and coating applicators, all surface preparation abrasive selection, coating supplies, and all surface prep and application equipment have been found to be in accordance with project surface prep and coating specification requirements.
Document project safety concerns, visible project delays or questionable project unknowns, and or inaccessible areas due to structural or architectural engineering designs that may cause future project delays.
Aid in achieving continuous communication with point of contact, while interpreting project coating specification requirements and coating mfg.
inconsistencies, or conflicting information found throughout project specification processes or jobsite-walk-through.
Negotiating a well-coordinated goal toward key principles, and project development.
Shop Applications.
Customers: NASA, USACE, DOT.
Industries: Aerospace, Hydro-power, Highways and Bridges.
Structure Types: Newly Fabricated Structural Steel, Draw Bridges, Bascule Bridges, and Machinery Parts.
Lock and Dams, Miter Gates, Vertical Lift Gates, End Trucks etc.

01/2014 to 01/2014

NACE Coating InspectorAbbott Consulting & Coating Inspections － Curry, AL

Perform In-process quality control (Industrial Coating Inspection) of newly fabricated steel weldments and or parts, while representing, performing and or fulfilling employer contractual duties during project involvement.
Aid in achieving continuous communication with point of contact, while interpreting project coating specification requirements and coating mfg.
inconsistencies, or conflicting information found throughout project specification processes or jobsite-walk-through.
Negotiating a well-coordinated goal toward key principles, and project development.
Coating Inspection consisted of observing, testing and documenting of the required pre-cleaning, dry-abrasive-blast cleaning processes, coating application methods and techniques, confirming all inspection hold points.
Assuring customers that job specifications, along with industry referenced standards, have been met and are in accordance with job requirements.
Shop Application.
Industrial Steel Building: plate girders, vertical columns, (external) piping, connection plates, angles etc.

01/2009 to 01/2014

Supervisor, NACE Coating InspectorSteward Machine Co., Inc － Birmingham, AL

01/2008 to 01/2009

Vulcan Painters Inc IUPAT － Bessemer, AL

District Council 77- Journeyman Painter, w/OSHA-10, PDA-Certified Duties:.
Assist coworkers throughout multiple industrial coating projects.
The projects consist of the following applications: concrete, structural steel weldments and misc.
small parts.
Apply specified coating system over concrete for site safety requirements and pedestrian right-aways.
Install a 100% epoxy (2) coat secondary containment systems to concrete floors, storm drains and non-skid pedestrian walkways throughout an Army-Jet-Engine-Application Facility, steam generating plant, and Veterinary hospital.
NAVY Battleship DC-1000 module and magazine weldments were dry-abrasive-blast-cleaned with the use of metallic recyclable abrasives, following up with the spray application of a 100% solid epoxy coating systems and applied with a plural-component spray unit.
Shop and Field Applications.
Industries: DOD, Steam Generation, Veterinarian Hospitals.
Structure Types: Concrete, New Steel, Previously painted steel.

01/2007 to 01/2008

Project SupervisorSMC Commercial Services LLC － Birmingham, AL

HAZWOPER Certified, PDA-Certified, SSPC-C3 Certified, Non-Certified.

01/2003 to 01/2007

SupervisorG & G Steel, Inc. / Warrior River Steel LLC － Cordova, AL

Industrial Painter, Thermal-Arc-Spray-Applicator, Non-Certified.
Coating Inspector.
Assist owners, project managers, plant managers, and quality control personnel throughout all project set-up, scheduling, and completion.
Share previous project related coating experiences with fellow colleagues throughout the surface prep and coating applications processes.
Address applicator techniques and application inconsistencies, while offering my personal input, and hands on training.
Obtain and interpret project specifications requirements, related documents, along with industry standards.
Review the specification and communicate with the owner if inconsistencies, or conflicting and or incorrect statements had been made.
Confirm and document all required coating inspection test instruments certificates have met specification requirements.
Confirm that all paints, solvents/thinners and cleaners received have met all project specification requirements and are stored properly.
Coordinate all required pre-cleaning, surface preparations, masking and coating applications processes.
Provide thorough hands on knowledge written documentation, record keeping during all project specified surface preparations, coating application processes, while providing for and in-house-coating inspections.
Shop Applications.
Customers: NASA, USACE, DOT.
Industries: Aerospace, Hydro-power, Highways and Bridges.
Structure Types: New steel, Draw Bridges, Bascule Bridges, and machinery parts.
Lock and Dams, Dewatering Systems, Maintenance Bulkheads, Culvert Valves, Miter Gates, Tainter Gates, and machinery items.

Steward Machine Co., Inc － St. Marks, FL

Independent Subcontractor, NACE Coating Inspector Level II Certified Note: The following duties listed below (St.
Marks) cover two identical projects for one customer, although the start and finish dates were not of the same.
Therefore, documenting the same project and its duties twice, has been minimized too one and dated as follows.

Industrial PainterThermal-Arc-Spray-Applicator

Work as an active team player while aiding (Owners, Plant Managers, Project Managers, Fabrication Dept.
Supervisors and QA/QC personnel) in the completion of the customer required Industrial and Marine Coating application systems to (Non-immersible and Immersible) type structures.
Obtain and review all project specifications surface prep and coating application related documents, along with current industry standards.
Review all project specifications and communicate with the owners if inconsistencies, or conflicting and or incorrect statements had been made/found.
Confirm and document all required coating inspection test instruments certificates have met specification requirements.
Confirm that all paints, solvents/thinners and cleaners received have met all project specification requirements and are stored properly.
Coordinate all required pre-cleaning, surface preparations, masking and coating applications processes.
Document and record all project specified surface preparations and coating application processes and coating inspections through hand written and or electronic processes.
Shop Applications.
Customers: NASA, USACE, DOT.
Industries: Aerospace, Hydro-power, Highways and Bridges.
Structure Types: New Steel, Draw Bridges, Bascule Bridges, Counter Weights, Sheaves and Machinery Parts.
Lock and Dams, Dewatering Systems, Maintenance Bulkheads, Culvert Valves, Miter Gates, Tainter Gates, Vertical Lift Gates and Machinery Parts.

Coating Inspector

Oversee daily required surface prep and coating and lining related work.
Request customer consent to retrieve pictures, as well as requesting permission to perform a jobsite-walk-through.
Document project safety concerns, visible project delays or questionable project unknowns, and or inaccessible areas due to structural or architectural engineering designs that may cause future project delays, or coating failures.
Obtain, review and adhere to all federal, state, and local codes and regulations.
All required job site related Hazardous waste operation (HAZWOPER) documents and referenced standards.
Document all required atmospheric monitoring and confirm all coating inspection test instruments are in compliance with project specification requirements.
Obtain, review and adhere to all project specifications surface prep and coating and lining related documents and all current industry referenced standards.
Communicate with the owners and/or site supervisors of inconsistencies, conflicting information, site safety issues.
Coordinate, Document, and record all project specified surface preparation and coating and lining application processes and coating inspections.
Confirm that paints, thinners and cleaners received have met all project specification requirements.
Field Applications.
Industries: Petroleum Facilities, Chemical Facilities.
Structure Types: Concrete, New steel, Previously painted, Interior/exterior above ground (oil/gas/diesel) storage tanks, pipe lines, pipe racks, frack tanks,.

Resume Overview

Companies Worked For:

Lower Gate Left Leaf
Lower Gate Right Leaf
Steward Machine Co., Inc
Abbott Consulting & Coating Inspections
Vulcan Painters Inc IUPAT
SMC Commercial Services LLC
G & G Steel, Inc. / Warrior River Steel LLC
Thermal-Arc-Spray-Applicator

Job Titles Held:

NACE Coating Inspector
Supervisor, NACE Coating Inspector
Project Supervisor
Supervisor
Industrial Painter
Coating Inspector

NACE Coating Inspector Resume Example

Resume Score: 60%

DISCLAIMER

Resume Overview

Create a job alert for [job role title] at [location].

Similar Resumes