LiveCareer-Resume

journeyman wireman resume example with 14 years of experience

Jessica Claire
, , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
Home: (555) 432-1000 - Cell: - resumesample@example.com - : - -
Professional Summary

Skilled Journeyman Electrician with expertise in layouts, installations and rough-in work. Familiar with fixtures and customer preferences. Methodical professional with meticulous attention to detail and efficiency. Certified Journeyman Electrician with 22 years electrical experience. Dedicated to adhering to highest quality work and safety standards. Certified in control electrical wiring repair, maintenance and installment. Proficient experienced in inspecting electrical systems and completing routine repairs. Dug trenches, drilled holes and broke up concrete to install conduits and system parts. Safe and efficient Journeyman Electrician adept at electrical installation and repair. Committed to promoting workplace safety utilizing OSHA standards. Proactive team player with strong problem-solving skills. Versatile Journeyman Electrician with hands-on and management experience in electrical. Offering exceptional knowledge of system installation. Meticulous with proven strengths .

Accomplishments

studied 2 years of electronics (industrial electronics)

trouble shooting down to component level

industrial controls



Skills
  • Electrical Safety
  • Worker Training
  • Power Cable Connection
  • Field Sketching
  • Lock Out-Tag Out Procedures
  • Conduit and Pipe Laying
  • Local Codes Compliance
  • Job Specifications Reading
  • Transformer Connection
  • Scaffolding and Ladder Work
  • Hand and Power Tool Operation
  • Parts Fabrication
  • Repair Planning
  • Layout Planning
  • Supply Control
  • Grounding Installation
  • Electrical Wiring and Fixtures
  • Circuit Continuity Assessment
  • Malfunction Diagnostics
  • Electrical Systems Testing
  • Terminating Cables
  • Process Monitoring
  • Emergency Lighting
  • Signal Generators
  • Rough Layouts
  • Cable Tray Systems
  • Commercial Electrical Work
  • Project Layout
  • Electrician Assistance
  • Corrective Actions
  • Instruction Interpretation
  • Onsite Support
  • Active Listening
  • Customer Feedback
  • Detailed Instruction
  • Construction Standards
  • Performance Optimization Strategies
  • Motor Installation and Wiring
  • Low and High Voltage
  • Troubleshooting and Problem Resolution
  • OSHA Standards and Codes
  • Panel Termination
  • Welding and Brazing
  • Construction Methods
  • Oscilloscope Operations
  • Voltage and Current Meters
  • Vehicle and Equipment Operation
  • PPE Gear
  • Accurate Measurements
  • Preliminary Electrical Layouts
  • Breaker Panel Installation
  • Wire Wrapping and Cutting
  • National Electric Code NFPA 70
Work History
08/2008 to 03/2022
Journeyman Wireman Ibew 357 City, STATE,
  • Completed rough-in, termination and underground work.
  • Repaired and installed new fixtures, wiring, circuits and motors.
  • Operated tools according to prescribed safety practices.
  • Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
  • Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
  • Verified problems, investigated faults and troubleshot solutions to enhance installations.
  • Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
  • Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
  • Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
  • Trained junior electrical professionals on proper procedures.
  • Evaluated existing electrical systems for maintenance, repair and update requirements.
  • Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
  • Enforced production safety and quality by supporting leadership in determining solutions for process issues and inefficiencies.
  • Educated wide range of entry-level electricians on best practices and company protocol, ensuring maximum productivity.
03/2008 to 06/2008
Apprentice Journyman Wireman Dynalectric City, STATE,

one line crew ,pipe racks for power distribution ,ran pipes pulled wires

,set panels, disconnects, trans formers
ran power for lights (mc) from dimmer panels ,installed 4x4 light panels installed safty wire for lights , installed a total of
80 light

06/2008 to 04/2009
Apprentice Journyman Wirem Employer Dynalectric Address 4475 W Quail Ave, Cit City, STATE,

under ground pipe racks, under ground electrical vaults
pull wire in electrical vaults
land wire in m.c.c.from mian tranformer
install mc to power lighting in hall ways and rooms can lights , 4x4 flouresent fixtures installed per nec
ran mcc for meeting halls
installed wall sconch lights

wired dimmer controls

04/2009 to 10/2009
Apprentice Journyman Electrician Company Name City, State,
  • Completed rough-in, termination and underground work.
  • Repaired and installed new fixtures, wiring, circuits and motors.
  • Operated tools according to prescribed safety practices.
  • Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
  • Sized components according to building specifications and user requirements.
11/2009 to 01/2010
Apprentice Journyman Wireman Company Name City, State,

set mcc for various pump motors

pulled cables to pump motors

wired pump motors

installed disconnects for motors

installed wire trays in subterranean control room

ran cables in wire trays and used double tie raps to hold cables down

set control over subterranean pump room

pulled wires to control and wired up controls

03/2010 to 05/2010
Apprentice Journyman Wireman Company Name City, State,

solor instalation

06/2010 to 11/2010
Apprentice Journyman Wireman Company Name City, State,

set m.c.c. in airport terminal 3 garage
ran pipe to electric rooms
pulled wire mians to mcc
landed primary wires in m.c.c.
dressed m.c.c. wirees in secondary of mcc
wired transformers in electric rooms

installed riged pipes on floors 1 thru 6 for parking lot over head lights
installed parking lot over head lights high preasure sodiam light fixtures
dug trenches outside parking struture and installed under grond pipe for entrance to parking garage
pulled wire in under ground pipes
landed wire
installed pipes ,boxes in garage offices
pulled wire
installed devisees in offices
installed outside lights ( high pressure sodium )

06/2011 to 08/2011
Apprentice Journyman Wireman Company Name City, State,

wireed rooms at nubo tower ceasure casino
devised in rooms , ran wires between floors

12/2011 to 02/2013
Apprentice Journyman Wireman Company Name City, State,

convention work at various locations around las vegas

las vegas convention center

sands convention center

mandalay bay convention center

Sahara Event Center

install electrical power for booths

install lighting in booths

hang powered signs

hang motors to lift signs

hang over head lights

rig signs for lifting

02/2013 to 05/2013
Apprentice Journyman Wireman Company Name City, State,

worked on fire alarm piping

pulled wire for fire alarm

installed under ground pipes in pool area

pulled wires in under ground pipes

installed lights in planters and walk ways

removed old pipes for out side lighting

installed new pipes and boxes for out side lighting

pulled new wires

installed new high pressure sodiam fixtures on side of building

connected wiresw

05/2013 to 08/2015
Journyman Wireman Company Name City, State,

convention work at varios locations around las vegas

las vegas convention center

sands convention center

mandalay bay convention center

Sahara Event Center

install electrical power for booths

install lighting in booths

hang powered signs

hang motors to lift signs

hang over head lights

rig signs for lifting

08/2015 to 10/2015
Journyman Wireman Company Name City, State,

light industrial

installed ground mat for sub station

did all cad welding on ground mat

cad weld ground to fence around sub station 85 cad welds

installed racks in relay house

installed control wiring in relay house

landed wires on controls for relays

ran under ground pipe racks from sub station to building

installed 6" pvc pipe Schedule 40 on racks per nec code

installed underground vaults

installed mini sub station in building 4160- 277/480

installed transformer 480-120/240

pulled secondary cables from sub station to building

dressed wires from sub station to building

installed pipe racks in various parts of building

installed racks for cable tray in various parts of building

ran pipe from 1/2" to 6" emt , and 3/4" to 4" rigid

installed 2500 foot of cable tray

installed panel for charging stations

piped from panel to m.c.c.

pulled wire from m.c.c. to panel

landed wire in m.c.c. and panel

ran pipe from panel to 8 different Disconnects (30 amp fused )

an pipe to 240 30 amp outlets ( 8) total

pulled wire from disconnects to out lets and wired them

Did rigging for transformer picks and set transformers

did rigging on various picks

( worked with crane operator with hand signals)

(tesla)

11/2015 to 06/2016
Journyman Wireman Company Name City, State,

convention work at various locations around las vegas

las vegas convention center

sands convention center

mandalay bay convention center

Sahara Event Center

install electrical power for booths

install lighting in booths

hang powered signs

hang lights off signs

hang motors to lift signs

hang over head lights

rig signs for lifting

06/2016 to 08/2016
JOURNYMAN WIREMAN Company Name City, State,

wire pulling crew (swing shift)

pulled cable in wire tray from three (3) different power sources to ups

secured cables with double tie raps

set racks for battery's

installed transfer switches between sources

(apple)

09/2016 to 11/2016
Journyman Wireman Company Name City, State,

convention work at various locations around las vegas

las vegas convention center

sands convention center

mandalay bay convention center

Sahara Event Center

install electrical power for booths

install lighting in booths

hang powered signs

hang motors to lift signs

hang over head lights

rig signs for lifting

02/2017 to 03/2017
Journyman Wireman Company Name City, State,

cleaned and rebuilt breakers

cleaned power duct

used megger on power duct to verify good

installed hangers for power duct

installed power duct

used megger on installed power duct to verify good

hung breakers and connected to power duct

04/2017 to 03/2020
Journyman Wireman Company Name City, State,

convention work at various locations around las vegas

las vegas convention center

sands convention center

mandalay bay convention center

Sahara Event Center

install electrical power for booths

install lighting in booths

hang powered signs

hang motors to lift signs

hang over head lights

rig signs for lifting

08/2021 to 03/2022
Journyman Wireman Company Name City, State,

installed ground ring around building

grounded machinry in building

cad weld all jionts in bonding ground ring

insalled ground ring on 4 buildings

installed cable trays

ran pipe racks

ran 3/4 "- 4" emt on pipe racks

installed 30 disconects in varios spots in building for automatic doors and load levalers

ran pipes and boxes for out side lighting

installed 50 flood lamp fixtures on the out side of building (led)

set 14 m.c.c. in 6 electric rooms

Education
Expected in 03/2013 to to
: Journyman Electrical Syudy
Ibew 357 Electrical Apprenticship Jatc of Southern - 620 Leigon Way Las Vegas Nevada,
GPA:
Expected in 03/1981 to to
High School Diploma:
Berea High School - Berea, OH,
GPA:
Certifications
  • License - 08/13/22 -08/13/25
  • boom lift, ives - 3 years (current)

  • fork lift Training - 1 / 8/11/2022 -8/112025 ( current)
  • Certified [fork lift -2], - [ current]
  • Certified fork lift-3, [Company Name] - [Timeframe][Timeframe]
  • Certified fork lift -4, [Company Name] - (current
  • Certified Aerial lift [Job Title], [Company Name] - (current)
  • Certified cpr first aid [Job Title], [Company Name] (current)
  • Certified osha 10[Job Title], [Company Name] - (current)
  • Certified crane signaling/safty [Job Title], [Company Name] - (current)
  • Certified arc welding [Job Title], [Company Name] - (current)
  • Certified aluminum welding [Job Title], [Company Name] - (current)
  • Certified certifified rigger[Job Title], [Company Name] - (current)
Additional Information

studied electronics (2 years )

industrial electronics

PC board design

trouble shooting down to component level

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Ibew 357 Electrical Apprenticship Jatc of Southern
  • Berea High School

Job Titles Held:

  • Journeyman Wireman
  • Apprentice Journyman Wireman
  • Apprentice Journyman Wirem
  • Apprentice Journyman Electrician
  • Apprentice Journyman Wireman
  • Apprentice Journyman Wireman
  • Apprentice Journyman Wireman
  • Apprentice Journyman Wireman
  • Apprentice Journyman Wireman
  • Apprentice Journyman Wireman
  • Journyman Wireman
  • Journyman Wireman
  • Journyman Wireman
  • JOURNYMAN WIREMAN
  • Journyman Wireman
  • Journyman Wireman
  • Journyman Wireman
  • Journyman Wireman

Degrees

  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: