LiveCareer-Resume

head of maintence resume example with 15+ years of experience

Jessica Claire
  • , , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
  • Home: (555) 432-1000
  • Cell:
  • resumesample@example.com
  • :
Summary

Dependable Maintenance Technician offering ten years of building maintenance and repair experience. In-depth knowledge of hand and power tool operations, safety protocols, and general maintenance. Superior expertise in carpentry, electrical systems, and exterior and interior lighting system repair. Safety-oriented Maintenance Worker offering ten years of troubleshooting and repair expertise. Dedicated and reliable with skills in problem-solving, general plumbing, and electrical work. Team-oriented with a commitment to completing tasks on-time and under budget. A highly-motivated employee with a desire to take on new challenges. Strong worth ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Skills
  • Power and Hand Tool Use
  • Mechanical Repair
  • Troubleshooting Strength
  • Understanding Schematics
  • Parts Lubrication
  • Facilities Painting and Repair
  • Clear Communication
  • Wiring Installation and Repair
  • Problem Detection and Resolution
  • Relationship Building
  • Repair Work Planning
  • Task Concentration
  • Equipment Dismantling
  • Hand and Power Tool Operation
  • Decision Making
  • Troubleshooting and Diagnostics
  • Critical Thinking
  • Electrical Component Replacement
  • Heavy Lifting
  • Piping Systems Maintenance
  • Supply and Parts Ordering
  • Preventive Maintenance
  • Heavy Object Lifting
  • Physical Strength and Stamina
  • Maintenance Scheduling
  • Safety-Oriented Mindset
  • Equipment Repair
  • Mechanical Aptitude
  • Organizational Ability
  • Reporting and Documentation
Experience
Head of Maintence, 05/2021 to Current
OerlikonDayton, OH,
  • Operated hand and power tools to complete repairs.
  • Maintained clear and safe workspace areas to meet OSHA standards.
  • Installed new systems, replacement parts and components to maintain proper operation.
  • Cleared clogged drains and replaced valves, faucets and fixtures.
  • Scheduled preventive maintenance programs to keep equipment in good working condition.
  • Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
  • Read and interpreted equipment and work orders to properly perform required maintenance services.
  • Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.
  • Collaborated with building managers to assess ongoing needs and plan preventive maintenance schedules.
  • Completed basic carpentry tasks and installed shelves, hooks and closet rods to meet customer needs.
  • Disassembled appliances to diagnose problems and facilitate repairs.
  • Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Implemented troubleshooting techniques to resolve issue.
  • Repaired machines, equipment or structures using tools or equipment.
  • Performed routine maintenance by inspecting drives, motors or belts.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Ordered parts, supplies or equipment from catalogs or suppliers.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Maintained or repaired specialized equipment or machinery.
  • Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Adjusted devices or control instruments using hand tools, levels or straightedges.
  • Recorded type and cost of maintenance or repair work.
  • Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
  • Aligned and balanced new equipment after installation.
  • Planned and laid out repair work using diagrams, drawings or schematic diagrams.
Maintenance Technician, 11/2018 to 05/2021
Massachusetts Institute Of TechnologyBoston, MA,
  • Operated hand and power tools to complete repairs.
  • Maintained clear and safe workspace areas to meet OSHA standards.
  • Installed new systems, replacement parts and components to maintain proper operation.
  • Cleared clogged drains and replaced valves, faucets and fixtures.
  • Scheduled preventive maintenance programs to keep equipment in good working condition.
  • Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Disassembled appliances to diagnose problems and facilitate repairs.
  • Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
  • Implemented diagnostics to identify failures, determine parts and material requirements and facilitate repairs.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Implemented troubleshooting techniques to resolve issue.
  • Repaired machines, equipment or structures using tools or equipment.
  • Performed routine maintenance by inspecting drives, motors or belts.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Ordered parts, supplies or equipment from catalogs or suppliers.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Maintained or repaired specialized equipment or machinery.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Adjusted devices or control instruments using hand tools, levels or straightedges.
  • Recorded type and cost of maintenance or repair work.
  • Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
  • Aligned and balanced new equipment after installation.
  • Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.
Electrician, 09/2016 to 11/2018
Bba AviationSioux Falls, SD,
  • Installed conduit, wire and motor controls.
  • Connected wires to circuit breakers and transformers.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
  • Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
  • Planned and installed complicated circuit systems in both commercial and residential construction.
  • Worked extensively on three-phase, 277/480 volt power distribution systems.
  • Interpreted schematics, blueprints and diagrams to complete projects on time.
  • Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
  • Assessed, tested and operated variety of electrical components and systems.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Performed electrical utility services for industrial-based and new building projects.
  • Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
  • Responded to emergency callbacks and provided onsite support.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Contributed to various projects, providing value to department, company and client base.
  • Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
  • Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
  • Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
Diesel Mechanic, 01/2006 to 01/2015
Patric EquipmentCity, STATE,
  • Placed orders for parts necessary to complete vehicle repairs and installations.
  • Completed preventive maintenance on engines, transmissions, tires and other vehicle systems.
  • Performed checklist of fluid levels, air filter, tire pressure and more as part of service orders.
  • Operated specialty equipment, standard tools and gauges to complete assessments and repairs.
  • Removed and disassembled defective diesel engines in automobiles, trucks, buses and construction vehicles to complete repairs.
  • Installed new vehicle systems and components.
  • Evaluated vehicle systems to assess function and uncover defects.
  • Reviewed repairs with customers and advocated for vehicle safety.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Disassembled and overhauled internal combustion engines, pumps and generators.
  • Conducted test drives before and after repair services.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Reconditioned and replaced pistons, bearings, gears and valves.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Optimized brake systems by adjusting and replacing components.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Attached test instruments to equipment, reading dials and gauges to diagnose malfunctions.
  • Conferred with customers to obtain descriptions of vehicle problems and discuss repair requirements.
  • Rewired ignition systems, lights and instrument panels.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
  • Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
Education and Training
High School Diploma: , Expected in 05/2002 to Conroe High School - Conroe, TX
GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Conroe High School

Job Titles Held:

  • Head of Maintence
  • Maintenance Technician
  • Electrician
  • Diesel Mechanic

Degrees

  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: