Electrical Control Engineer Resume Example Hypertherm

ELECTRICAL CONTROL ENGINEER

Summary

To obtain an electrical engineering position at Disney that will enable me to use my work experiences and ability to work well with people, while engaging in new challenges and learning experiences.

Accomplishments

NASA Group Achievement Award (05/2010): Space Shuttle Lightning Evaluation Team For exemplary technical performance in evaluation potential vehicle damage due to Lightning strikes during STS-125, STS-127, and STS-128 launch pad operations." Galaxy Team Work Award (01/2010) Successful completion of KCID 90% design package products under unrealistic schedule expectations (10 weeks) with no increase in resources, in addition to normal responsibilities." Galaxy Team Work Award (10/2010) Perform above and beyond to meet the 90% Design delivery schedule of HGLDS design project.
Team members were pulled off other activities to lend specific skills to improve the overall quality of design package.
The team's effective use of "matrixed" skills positively impacted team dynamics and contributed significantly to organizational success and customer satisfactions." Attended National Fire Protection Association (NFPA) Seminar, National Electrical Code (NEC) Essentials and IES Lighting Conference 2009.

Experience

HyperthermMarch 2011 to CurrentElectrical Control Engineer
OR

Supporting electrical design on Hypergol system for MPPF.
Create/review electrical drawings such as Advanced Electrical Schematic (AES), Cable Interconnect diagram (CID) & Enclosure assembly drawings Supporting Fabrication of Hypergol Enclosures Write Work Authorization Control (WAC) Order to build each of enclosures Provide parts to technician for building enclosure and answer any questions during the fabrication of the enclosures Write Unit Test Procedures and leading unit testing for each of the enclosures Layout/Continuity Verification: verify hardware layout is configured; components are place correctly in enclosure and wiring according with drawings.
Power Verification: apply power to the enclosure in stage and verify distribution and measurement PLC I/O Verification: energize, measure and verify each channel of the PLCs installed in the enclosure using RSLogix Software development Support writing the Software Requirements and Design Specifications for the Command, Control, and Communication Software System needed to operate and maintain the Hypergolic and High Pressure Helium (HP GHe) Servicing System located at the Multi-Purpose Processing Facility (MPPF) at the Kennedy Space Center (KSC) Using Factory Talk View to create SCADA screens to display any system data that may require monitoring for this subsystems Testing between PLC code and SCADA screens Health Management System (HMS) Using Factory Talk View to create SCADA screens for each subsystems to display all Health monitoring information such as status of PLC, Ethernet, ControlNet, Power Supplies for PLC, Remote I/O Modules, and Circuit Breaker, as well as any system data that may require monitoring from outside of Command & Control Systems Supporting ECS, GSP & IOPSS Channelization Testing for HMS Monitoring each indication on the screen for actual response of each hardware Writing Unit Test Procedures for HMS and Emergency Safing (EMSF) High Pressure Gas System Supported electrical design on GHe (Gaseous Helium), GN2 (Gaseous Nitrogen) & GO2 (Gaseous Oxygen) systems for MPPF Create/review electrical drawings such as Advanced Electrical Schematic (AES), Cable Interconnect diagram (CID) & Enclosure assembly drawings Channelize Testing the Terminal Distribution Boxes Accomplished other duties regarding to electrical designs (hardware and software) Cryogenic System Supported electrical design on LH2 (Liquid Hydrogen) and LO2 (Liquid Oxygen) system for PAD and ML (Mobile Launcher).

HyperthermOctober 2009 to February 2011Electrical Control Engineer
UT

Cryogenic System Perform electrical design on LH2 (Liquid Hydrogen) and LO2 (Liquid Oxygen) system for PAD and ML (Mobile Launcher) Create/review electrical drawings such as Advanced Electrical Schematic (AES), Cable Interconnect diagram (CID) & Enclosure assembly drawings Research different parts such as relays, power supplies, terminal blocks, circuit breakers, fuses, disconnect switches, media converters and diode modules etc.
for enclosure assemblies Assemble all parts and Allen Bradley PLC chassis design layout in the enclosure assemblies Pick out connectors for the Hoffman enclosures and make drilling patterns for the enclosure and panel assemblies Support other teams such as IOPSS and KCCS Firex/Potable Water projects as necessary to complete design review packages Accomplished other duties regarding to electrical designs (hardware and software).

Raytheon Technologies CorpDecember 2007 to October 2009Electrical Engineer
CO

Ground Lightning Monitoring System (GLMS ) Project Assisted to perform highly specialized design, research parts & analysis on the project.
Prepared, developed and reviewed electrical drawings such as Installation drawing, Advanced Electrical Schematic (AES), Cable Interconnect diagram (CID) & Cable assembly drawings.
Conducted design reviews in accordance with Shuttle Processing and internal procedures Provided on-site support during walk downs and weekly meetings to verify hardware performance and drawings Monitored the quality of design outputs Determined schedule priorities and ensure timely completion of assigned tasks Accomplished other duties regarding to electrical designs ARC Flash Project Reviewed and researched on existing breakers for series ratings from different manufactures using single-line drawings, SKM software and online sources Studied under-rated panels and breakers in KSC area and perform walk down as necessary to verify the breakers and panels are series rated Provided comments & recommendations for series rating on breakers and panels Oxygen Deficiency Monitoring System Project Designed & generated drawings for Oxygen Analyzer Alarm Distribution Panel Assembly invarious facilities Prepared Installation drawings for TVCD Facility on Oxygen Deficiency Monitoring System and SRB assembly & Refurbishment Facility Helped generate schematic and wire running lists for these facilities Picked up redline for project related drawings Ares 1-X Project Provided engineering support for instrumentation measurement during Ares 1-X Walked downs for ground measurement sensors (existing and newly added sensors for PAD B, MLP and VSS) Lighting Design Project Assigned to study and research on lighting requirement for various environments.

Price ChopperAugust 2000 to December 2007Store Manager
Salem , NY

Provide services to customers with needs.
Running daily business and perform general accounting.
Tracking sales and import supplies.

Cargill, Inc.March 2006 to March 2007Reliability Engineer
Salt Lake City , OH

Developed Environmental Stress Screening test plans for Joint Strike Fighter (JSF) program Review Subcontractor Data Review List (SDRL) submittals for compliance to JSF reliability requirements Performed reliability predictions for different components and assemblies of Electro-Optical Targeting System (EOTS) Maintained the JSF EOTS RELEX Failure Reporting Analysis and Corrective Action System (FRACAS) database Monitored JSF EOTS supplier's testing and manufacturing progress Completed monthly Test Failure Results Resolution Reports (TFRR) Communicated with customers regard to Reliability issues.

Bickford Senior LivingAugust 2005 to August 2006Lab Instructor
Colorado Springs , IA

Led 25+ students through laboratory/homework assignments.
Responsible for operation, maintenance lab equipments.
Troubleshot and answered questions regard to electric circuits.
Grading laboratory assignments.

Clyde Companies Inc.August 2004 to May 2005Granville , NE

Performed researches on different sensor systems for Walt Disney World monorail train system.
Developed a prototype which best fit for the monorail train system.
Tested beam sensor system on the monorail.

AltiumMay 2004 to July 2004Intern
Sidney , NY

Research Experience for Undergraduates Program (NSF-REU).
Worked at Institute & Simulation Technology (IST) on developing & calibrating Sensors.

University Of Central FloridaOctober 2003 to December 2003Office Assistant
Des Moines , STATE

School of Electrical and Computer Engineering.
Microsoft Office Application.
Phones, filing, distribute & pickup mail.
SASS audits, miscellaneous duties as assigned.

Education

University of Central Florida2006Master of Science: Computer EngineeringCity, State

University of Central Florida2005Bachelor of Science: Electrical EngineeringCity, State

Valencia Community College2003Associate: Arts, EngineeringCity, State

Professional Affiliations

Member: Tau Beta Pi Phi Theta Kappa IEEE Society of Women Engineering

Resume Overview

School Attended

University of Central Florida
Valencia Community College

Job Titles Held:

Electrical Control Engineer
Electrical Engineer
Store Manager
Reliability Engineer
Lab Instructor
Intern
Office Assistant

Degrees

Master of Science : Computer Engineering
Bachelor of Science : Electrical Engineering
Associate : Arts, Engineering

Electrical Control Engineer Resume Example

DISCLAIMER

How this resume score could be improved?

Resume Overview

Create a job alert for [job role title] at [location].

Similar Resumes